60P Multi-Crystalline Photovoltaic Module

PDF Print E-mail
The TSM-60P/3B-235, TSM-60P/B3-240, TSM-60P/B3-245 are distinguished by Multi-crystalline solar cells with high efficiency up to 14.75% high output per square meter of module area. MSR delivers modules with positive tolerance from 0 – 4.99 watt, modules of the highest quality would be able to provide with this level of reliability.

1.

Modules with high output quality

2.

High efficiency based on leading innovative photovoltaic technologies

3.

Maximum yields and longevity due to 100% hotspot prevention

4.

Excellent performance due to outstanding low-light performance

5.

Withstand high wind pressure and extreme temperature variations

6.

High transparent 3.2mm / 4mm low-iron tempered glass

7.

Unique technology enable no water freezing and warping do not occur

8.

Aesthetic appearance

9.

25 years power output warranty (long life span)

10. PV Produces energy without emissions (green house gases) and noise free TUV Rheiland certified modules accordance to IEC 61215 ed. 2 2005, IEC 61730, Part 1, 2004 and IEC 61701 Salt mist corrosion testing of photovoltaic (PV) modules.

Technical Data


Mechanical Parameters


 

.
All parameters are rated at Standard Test Conditions (irradiance of 1000W/m2,  AM 1.5, cell temperature 25C).The measuring uncertainty of Pmax is +-3% tolerance. All measurements are guaranteed at the laminate leads. NOCT is measured at 800W/m2, 20 C. Ambient temperature, and 1 m/s windspeed. Specfications are subject to change without any notice.

 

NOTE: The statements made herein are based on our research and the research of others, and believed to be accurate. No guarantee of their accuracy is made,however, and the products
discussed are sold without warranty, expressed or implied, including warranty of merchantability and  tness for use of this material, upon condition  that purchasers  shall make their own tests
to determine the suitability of such products for their particular purposes. The user assumes all risk of use or handling, whether or not in accordance with any statements of the supplier.
Suppliers liability, if any, for any action arising out of the material being supplied  shall be limited to replacement of material. Statements concerning the possible use of these products are not
intended as recommendations to use these products in infringement of any patent.